Mr. Moore Liu
Leave a messageMr. Moore Liu
Leave a message
The rod of the 29000 type bearing is an asymmetrical spherical roller, which can reduce the relative slipping of roller and raceway in operation, and has many advantages such as long roller diameter, large diameter, large number of rollers and high load capacity. Usually, oil lubrication is used, and grease can be lubricated at some low speed. In the design and selection, it should be selected first.
The 80000 type thrust Cylindrical Roller Bearing, the 90000 type thrust cone Roller Bearing and the AXK type thrust roller Needle Bearing can withstand the uniaxial axial load, which is much larger than the thrust ball bearing's axial load capacity, and has large rigidity and occupies small axial space.
Thrust cylindrical roller bearing and thrust cone roller bearing are suitable for low rotational speed, and thrust cone roller bearing speed is slightly higher than that of thrust cylindrical roller bearing. The thrust cylindrical roller bearing is a separable bearing. It can only withstand one-way axial load and slight impact, and can restrict the axial displacement of the shaft (or shell) in one direction, so it can be used for unidirectional axial positioning. But its bearing capacity is far greater than that of the thrust ball bearing. When roller is rolling, the roller will inevitably slide on the raceway because of the different speed of the two ends of the roller. Therefore, the limit speed of this kind of bearing is lower than that of the thrust ball bearing, which is usually suitable for low speed operation.
The standard design of thrust cylindrical roller bearing adopts a metal solid cage. According to the requirements of the user, other types or materials can be used. The thrust Tapered Roller Bearing can only bear one direction axial load, which can limit the unidirectional axial displacement of the bearing, so it can be used as a one-way axial orientation. Compared with the thrust cylindrical roller bearing, the bearing capacity is large and the relative sliding is small, but the limit speed is low.